OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 00:13:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/lorax-25.16-1.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/lorax.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [= ] 2.8 MB/s | 879 kB 00:03 ETA Local RPMS 13% [==- ] 2.8 MB/s | 1.6 MB 00:03 ETA Local RPMS 21% [==== ] 2.8 MB/s | 2.5 MB 00:03 ETA Local RPMS 30% [====== ] 2.9 MB/s | 3.6 MB 00:02 ETA Local RPMS 39% [=======- ] 2.9 MB/s | 4.6 MB 00:02 ETA Local RPMS 48% [=========- ] 2.9 MB/s | 5.7 MB 00:02 ETA Local RPMS 57% [=========== ] 3.0 MB/s | 6.7 MB 00:01 ETA Local RPMS 59% [===========- ] 2.8 MB/s | 6.9 MB 00:01 ETA Local RPMS 67% [=============- ] 2.8 MB/s | 7.9 MB 00:01 ETA Local RPMS 73% [==============- ] 2.8 MB/s | 8.5 MB 00:01 ETA Local RPMS 79% [===============- ] 2.7 MB/s | 9.2 MB 00:00 ETA Local RPMS 84% [================- ] 2.7 MB/s | 9.8 MB 00:00 ETA Local RPMS 90% [================== ] 2.7 MB/s | 11 MB 00:00 ETA Local RPMS 95% [=================== ] 2.6 MB/s | 11 MB 00:00 ETA Local RPMS 2.1 MB/s | 12 MB 00:05 Last metadata expiration check: 0:01:30 ago on Thu Feb 22 00:13:36 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: python3-devel riscv64 3.6.4-14.0.fc28 local 862 k Installing dependencies: dwz riscv64 0.12-5.fc28 local 108 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-rpm-macros noarch 3-26.fc28 local 11 k python-srpm-macros noarch 3-26.fc28 local 10 k python3-rpm-generators noarch 5-1.fc28 local 23 k python3-rpm-macros noarch 3-26.fc28 local 10 k python3-setuptools noarch 38.4.0-3.fc28 local 620 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k unzip riscv64 6.0-36.fc28 local 398 k zip riscv64 3.0-20.fc28 local 271 k Transaction Summary ================================================================================ Install 25 Packages Total download size: 2.6 M Installed size: 7.8 M Downloading Packages: (1/25): python3-deve 0% [ ] --- B/s | 0 B --:-- ETA (1/25): python-rpm-macros-3-26.fc28.noarch.rpm 256 kB/s | 11 kB 00:00 (2-3/25): python3-rp 1% [ ] 663 kB/s | 42 kB 00:03 ETA (2/25): python3-rpm-generators-5-1.fc28.noarch. 270 kB/s | 23 kB 00:00 (3-4/25): python3-se 3% [- ] 663 kB/s | 81 kB 00:03 ETA (3/25): python3-rpm-macros-3-26.fc28.noarch.rpm 412 kB/s | 10 kB 00:00 (4-5/25): python3-se 4% [- ] 665 kB/s | 123 kB 00:03 ETA (4/25): redhat-rpm-config-96-1.fc28.0.riscv64.n 822 kB/s | 75 kB 00:00 (5-6/25): python3-se 13% [==- ] 697 kB/s | 358 kB 00:03 ETA (5/25): nim-srpm-macros-1-1.fc28.noarch.rpm 313 kB/s | 7.6 kB 00:00 (6-7/25): python3-se 14% [==- ] 698 kB/s | 397 kB 00:03 ETA (6/25): ocaml-srpm-macros-5-2.fc27.noarch.rpm 328 kB/s | 7.8 kB 00:00 (7-8/25): python3-se 16% [=== ] 699 kB/s | 437 kB 00:03 ETA (7/25): openblas-srpm-macros-2-2.fc27.noarch.rp 290 kB/s | 6.6 kB 00:00 (8-9/25): python3-se 17% [===- ] 700 kB/s | 476 kB 00:03 ETA (8/25): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 381 kB/s | 9.0 kB 00:00 (9-10/25): python3-s 19% [===- ] 702 kB/s | 517 kB 00:03 ETA (9/25): rust-srpm-macros-5-1.fc28.noarch.rpm 339 kB/s | 8.0 kB 00:00 (10-11/25): python3- 20% [==== ] 703 kB/s | 557 kB 00:03 ETA (10/25): file-5.32-3.fc28.riscv64.rpm 772 kB/s | 81 kB 00:00 (11-12/25): python3- 30% [====== ] 740 kB/s | 830 kB 00:02 ETA (11/25): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 545 kB/s | 14 kB 00:00 (12-13/25): python3- 32% [======- ] 742 kB/s | 875 kB 00:02 ETA (12/25): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 599 kB/s | 15 kB 00:00 (13-14/25): python3- 34% [======- ] 744 kB/s | 923 kB 00:02 ETA (13/25): pkgconf-1.4.1-1.fc27.riscv64.rpm 631 kB/s | 35 kB 00:00 (14-15/25): python3- 39% [=======- ] 758 kB/s | 1.0 MB 00:02 ETA (14/25): libpkgconf-1.4.1-1.fc27.riscv64.rpm 823 kB/s | 74 kB 00:00 (15-16/25): python3- 47% [=========- ] 787 kB/s | 1.3 MB 00:01 ETA (15/25): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 308 kB/s | 7.5 kB 00:00 (16-17/25): python3- 49% [=========- ] 788 kB/s | 1.3 MB 00:01 ETA (16/25): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 339 kB/s | 8.2 kB 00:00 (17-18/25): python3- 50% [========== ] 788 kB/s | 1.3 MB 00:01 ETA (17/25): gnat-srpm-macros-4-5.fc28.noarch.rpm 367 kB/s | 8.8 kB 00:00 (18-19/25): python3- 52% [========== ] 788 kB/s | 1.4 MB 00:01 ETA (18/25): go-srpm-macros-2-11.fc28.noarch.rpm 354 kB/s | 8.4 kB 00:00 (19-20/25): python3- 53% [==========- ] 789 kB/s | 1.4 MB 00:01 ETA (19/25): perl-srpm-macros-1-26.fc28.noarch.rpm 402 kB/s | 9.7 kB 00:00 (20-21/25): python3- 55% [=========== ] 790 kB/s | 1.5 MB 00:01 ETA (20/25): python-srpm-macros-3-26.fc28.noarch.rp 406 kB/s | 10 kB 00:00 (21-22/25): python3- 57% [=========== ] 791 kB/s | 1.5 MB 00:01 ETA (21/25): python3-setuptools-38.4.0-3.fc28.noarc 468 kB/s | 620 kB 00:01 (22-23/25): python3- 65% [============= ] 810 kB/s | 1.7 MB 00:01 ETA (22/25): dwz-0.12-5.fc28.riscv64.rpm 475 kB/s | 108 kB 00:00 (23-24/25): python3- 69% [=============- ] 816 kB/s | 1.8 MB 00:01 ETA (23/25): python3-devel-3.6.4-14.0.fc28.riscv64. 481 kB/s | 862 kB 00:01 (24-25/25): zip-3.0- 90% [================== ] 882 kB/s | 2.4 MB 00:00 ETA (24/25): zip-3.0-20.fc28.riscv64.rpm 631 kB/s | 271 kB 00:00 (25/25): unzip-6.0-3 94% [==================- ] 887 kB/s | 2.5 MB 00:00 ETA (25/25): unzip-6.0-36.fc28.riscv64.rpm 863 kB/s | 398 kB 00:00 -------------------------------------------------------------------------------- Total 1.2 MB/s | 2.6 MB 00:02 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [== ] 1/1 Preparing : [==== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : python-srpm-macros-3-26. [ ] 1/25 Installing : python-srpm-macros-3-26. [======================= ] 1/25 Installing : python-srpm-macros-3-26.fc28.noarch 1/25 Installing : python-rpm-macros-3-26.f [ ] 2/25 Installing : python-rpm-macros-3-26.f [======================= ] 2/25 Installing : python-rpm-macros-3-26.fc28.noarch 2/25 Installing : unzip-6.0-36.fc28.riscv6 [ ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [= ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 3/25 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 3/25 Installing : unzip-6.0-36.fc28.riscv64 3/25 Installing : zip-3.0-20.fc28.riscv64 [ ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [= ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [=== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [==== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [===== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [====== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [======= ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [======== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [========= ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [========== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [============ ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [============= ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [============== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [================ ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [================= ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [================== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 4/25 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 4/25 Installing : zip-3.0-20.fc28.riscv64 4/25 Installing : dwz-0.12-5.fc28.riscv64 [ ] 5/25 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 5/25 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 5/25 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 5/25 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 5/25 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 5/25 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 5/25 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 5/25 Installing : dwz-0.12-5.fc28.riscv64 5/25 Installing : perl-srpm-macros-1-26.fc [ ] 6/25 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/25 Installing : perl-srpm-macros-1-26.fc28.noarch 6/25 Installing : go-srpm-macros-2-11.fc28 [ ] 7/25 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/25 Installing : go-srpm-macros-2-11.fc28.noarch 7/25 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/25 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/25 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/25 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/25 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/25 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/25 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/25 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/25 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/25 Installing : libpkgconf-1.4.1-1.fc27. [ ] 11/25 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 11/25 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 11/25 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 11/25 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 11/25 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 11/25 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 11/25 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 11/25 Installing : libpkgconf-1.4.1-1.fc27.riscv64 11/25 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 11/25 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 12/25 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 12/25 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 12/25 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 12/25 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 12/25 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 12/25 Installing : pkgconf-1.4.1-1.fc27.riscv64 12/25 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 13/25 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 13/25 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 13/25 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 13/25 Installing : pkgconf-pkg-config-1.4.1 [ ] 14/25 Installing : pkgconf-pkg-config-1.4.1 [==== ] 14/25 Installing : pkgconf-pkg-config-1.4.1 [===== ] 14/25 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 14/25 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 14/25 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 14/25 Installing : file-5.32-3.fc28.riscv64 [ ] 15/25 Installing : file-5.32-3.fc28.riscv64 [====== ] 15/25 Installing : file-5.32-3.fc28.riscv64 [=========== ] 15/25 Installing : file-5.32-3.fc28.riscv64 [================== ] 15/25 Installing : file-5.32-3.fc28.riscv64 [===================== ] 15/25 Installing : file-5.32-3.fc28.riscv64 [====================== ] 15/25 Installing : file-5.32-3.fc28.riscv64 [======================= ] 15/25 Installing : file-5.32-3.fc28.riscv64 [======================== ] 15/25 Installing : file-5.32-3.fc28.riscv64 15/25 Installing : rust-srpm-macros-5-1.fc2 [ ] 16/25 Installing : rust-srpm-macros-5-1.fc2 [=== ] 16/25 Installing : rust-srpm-macros-5-1.fc2 [===== ] 16/25 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 16/25 Installing : rust-srpm-macros-5-1.fc28.noarch 16/25 Installing : qt5-srpm-macros-5.10.0-1 [ ] 17/25 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 17/25 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 17/25 Installing : openblas-srpm-macros-2-2 [ ] 18/25 Installing : openblas-srpm-macros-2-2 [================ ] 18/25 Installing : openblas-srpm-macros-2-2.fc27.noarch 18/25 Installing : ocaml-srpm-macros-5-2.fc [ ] 19/25 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 19/25 Installing : ocaml-srpm-macros-5-2.fc27.noarch 19/25 Installing : nim-srpm-macros-1-1.fc28 [ ] 20/25 Installing : nim-srpm-macros-1-1.fc28 [=== ] 20/25 Installing : nim-srpm-macros-1-1.fc28 [===== ] 20/25 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 20/25 Installing : nim-srpm-macros-1-1.fc28.noarch 20/25 Installing : redhat-rpm-config-96-1.f [ ] 21/25 Installing : redhat-rpm-config-96-1.f [== ] 21/25 Installing : redhat-rpm-config-96-1.f [=== ] 21/25 Installing : redhat-rpm-config-96-1.f [========= ] 21/25 Installing : redhat-rpm-config-96-1.f [=========== ] 21/25 Installing : redhat-rpm-config-96-1.f [================= ] 21/25 Installing : redhat-rpm-config-96-1.f [================== ] 21/25 Installing : redhat-rpm-config-96-1.f [=================== ] 21/25 Installing : redhat-rpm-config-96-1.f [===================== ] 21/25 Installing : redhat-rpm-config-96-1.f [====================== ] 21/25 Installing : redhat-rpm-config-96-1.f [======================== ] 21/25 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 21/25 Installing : python3-rpm-macros-3-26. [ ] 22/25 Installing : python3-rpm-macros-3-26. [======================= ] 22/25 Installing : python3-rpm-macros-3-26.fc28.noarch 22/25 Installing : python3-setuptools-38.4. [ ] 23/25 Installing : python3-setuptools-38.4. [= ] 23/25 Installing : python3-setuptools-38.4. [== ] 23/25 Installing : python3-setuptools-38.4. [=== ] 23/25 Installing : python3-setuptools-38.4. [==== ] 23/25 Installing : python3-setuptools-38.4. [===== ] 23/25 Installing : python3-setuptools-38.4. [====== ] 23/25 Installing : python3-setuptools-38.4. [======= ] 23/25 Installing : python3-setuptools-38.4. [======== ] 23/25 Installing : python3-setuptools-38.4. [========= ] 23/25 Installing : python3-setuptools-38.4. [========== ] 23/25 Installing : python3-setuptools-38.4. [=========== ] 23/25 Installing : python3-setuptools-38.4. [============ ] 23/25 Installing : python3-setuptools-38.4. [============= ] 23/25 Installing : python3-setuptools-38.4. [============== ] 23/25 Installing : python3-setuptools-38.4. [=============== ] 23/25 Installing : python3-setuptools-38.4. [================ ] 23/25 Installing : python3-setuptools-38.4. [================= ] 23/25 Installing : python3-setuptools-38.4. [================== ] 23/25 Installing : python3-setuptools-38.4. [=================== ] 23/25 Installing : python3-setuptools-38.4. [==================== ] 23/25 Installing : python3-setuptools-38.4. [===================== ] 23/25 Installing : python3-setuptools-38.4. [====================== ] 23/25 Installing : python3-setuptools-38.4. [======================= ] 23/25 Installing : python3-setuptools-38.4. [======================== ] 23/25 Installing : python3-setuptools-38.4.0-3.fc28.noarch 23/25 Installing : python3-rpm-generators-5 [ ] 24/25 Installing : python3-rpm-generators-5 [===== ] 24/25 Installing : python3-rpm-generators-5 [=================== ] 24/25 Installing : python3-rpm-generators-5 [======================== ] 24/25 Installing : python3-rpm-generators-5-1.fc28.noarch 24/25 Installing : python3-devel-3.6.4-14.0 [ ] 25/25 Installing : python3-devel-3.6.4-14.0 [= ] 25/25 Installing : python3-devel-3.6.4-14.0 [== ] 25/25 Installing : python3-devel-3.6.4-14.0 [=== ] 25/25 Installing : python3-devel-3.6.4-14.0 [==== ] 25/25 Installing : python3-devel-3.6.4-14.0 [===== ] 25/25 Installing : python3-devel-3.6.4-14.0 [====== ] 25/25 Installing : python3-devel-3.6.4-14.0 [======= ] 25/25 Installing : python3-devel-3.6.4-14.0 [======== ] 25/25 Installing : python3-devel-3.6.4-14.0 [========= ] 25/25 Installing : python3-devel-3.6.4-14.0 [========== ] 25/25 Installing : python3-devel-3.6.4-14.0 [=========== ] 25/25 Installing : python3-devel-3.6.4-14.0 [============ ] 25/25 Installing : python3-devel-3.6.4-14.0 [============= ] 25/25 Installing : python3-devel-3.6.4-14.0 [============== ] 25/25 Installing : python3-devel-3.6.4-14.0 [=============== ] 25/25 Installing : python3-devel-3.6.4-14.0 [================ ] 25/25 Installing : python3-devel-3.6.4-14.0 [================= ] 25/25 Installing : python3-devel-3.6.4-14.0 [================== ] 25/25 Installing : python3-devel-3.6.4-14.0 [=================== ] 25/25 Installing : python3-devel-3.6.4-14.0 [==================== ] 25/25 Installing : python3-devel-3.6.4-14.0 [===================== ] 25/25 Installing : python3-devel-3.6.4-14.0 [====================== ] 25/25 Installing : python3-devel-3.6.4-14.0 [======================= ] 25/25 Installing : python3-devel-3.6.4-14.0 [======================== ] 25/25 Installing : python3-devel-3.6.4-14.0.fc28.riscv64 25/25 Running scriptlet: python3-devel-3.6.4-14.0.fc28.riscv64 25/25 Verifying : python3-devel-3.6.4-14.0.fc28.riscv64 1/25 Verifying : python-rpm-macros-3-26.fc28.noarch 2/25 Verifying : python3-rpm-generators-5-1.fc28.noarch 3/25 Verifying : python3-setuptools-38.4.0-3.fc28.noarch 4/25 Verifying : python3-rpm-macros-3-26.fc28.noarch 5/25 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 6/25 Verifying : nim-srpm-macros-1-1.fc28.noarch 7/25 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 8/25 Verifying : openblas-srpm-macros-2-2.fc27.noarch 9/25 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 10/25 Verifying : rust-srpm-macros-5-1.fc28.noarch 11/25 Verifying : file-5.32-3.fc28.riscv64 12/25 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 13/25 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 14/25 Verifying : pkgconf-1.4.1-1.fc27.riscv64 15/25 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 16/25 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 17/25 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 18/25 Verifying : gnat-srpm-macros-4-5.fc28.noarch 19/25 Verifying : go-srpm-macros-2-11.fc28.noarch 20/25 Verifying : perl-srpm-macros-1-26.fc28.noarch 21/25 Verifying : python-srpm-macros-3-26.fc28.noarch 22/25 Verifying : dwz-0.12-5.fc28.riscv64 23/25 Verifying : zip-3.0-20.fc28.riscv64 24/25 Verifying : unzip-6.0-36.fc28.riscv64 25/25 Installed: python3-devel.riscv64 3.6.4-14.0.fc28 dwz.riscv64 0.12-5.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-rpm-macros.noarch 3-26.fc28 python-srpm-macros.noarch 3-26.fc28 python3-rpm-generators.noarch 5-1.fc28 python3-rpm-macros.noarch 3-26.fc28 python3-setuptools.noarch 38.4.0-3.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rust-srpm-macros.noarch 5-1.fc28 unzip.riscv64 6.0-36.fc28 zip.riscv64 3.0-20.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:00:01 ago on Thu Feb 22 00:16:19 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build random: crng init done Last metadata expiration check: 0:00:22 ago on Thu Feb 22 00:16:19 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group rpm-build info findutils which cpio tar sed util-linux grep shadow-utils xz gawk redhat-rpm-config bash fedora-release bzip2 patch make coreutils gzip unzip diffutils ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M elfutils riscv64 0.170-4.fc28 local 791 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 11 Packages Total download size: 11 M Installed size: 48 M Downloading Packages: (1/11): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/11): diffutils- 6% [= ] 2.6 MB/s | 799 kB 00:04 ETA (1/11): make-4.2.1-6.fc27.riscv64.rpm 924 kB/s | 486 kB 00:00 (2-3/11): tar-1.29-7 12% [==- ] 2.6 MB/s | 1.4 MB 00:03 ETA (2/11): diffutils-3.6-3.fc28.riscv64.rpm 790 kB/s | 577 kB 00:00 (3-4/11): tar-1.29-7 14% [==- ] 2.5 MB/s | 1.7 MB 00:03 ETA (3/11): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 671 kB/s | 235 kB 00:00 (4-5/11): tar-1.29-7 18% [===- ] 2.5 MB/s | 2.1 MB 00:03 ETA (4/11): tar-1.29-7.fc27.riscv64.rpm 708 kB/s | 805 kB 00:01 (5-6/11): zstd-1.3.3 20% [==== ] 2.5 MB/s | 2.3 MB 00:03 ETA (5/11): which-2.21-4.fc28.riscv64.rpm 339 kB/s | 65 kB 00:00 (6/11): zstd-1.3.3-1 20% [==== ] 2.5 MB/s | 2.3 MB 00:03 ETA (6/11): xz-5.2.3-5.fc28.riscv64.rpm 901 kB/s | 212 kB 00:00 (7-8/11): patch-2.7. 25% [===== ] 2.5 MB/s | 3.0 MB 00:03 ETA (7/11): patch-2.7.5-6.fc27.riscv64.rpm 606 kB/s | 270 kB 00:00 (8-9/11): bzip2-1.0. 27% [===== ] 2.4 MB/s | 3.1 MB 00:03 ETA (8/11): bzip2-1.0.6-24.fc28.riscv64.rpm 295 kB/s | 81 kB 00:00 (9-10/11): elfutils- 28% [=====- ] 2.4 MB/s | 3.2 MB 00:03 ETA (9-11/11): binutils- 35% [======= ] 2.4 MB/s | 4.0 MB 00:03 ETA (9-11/11): zstd-1.3. 42% [========- ] 2.4 MB/s | 4.9 MB 00:02 ETA (9/11): zstd-1.3.3-1.fc27.riscv64.rpm 651 kB/s | 1.1 MB 00:01 (10-11/11): elfutils 44% [========- ] 2.3 MB/s | 5.1 MB 00:02 ETA (10/11): elfutils-0.170-4.fc28.riscv64.rpm 743 kB/s | 791 kB 00:01 (11/11): binutils-2. 46% [========= ] 2.3 MB/s | 5.3 MB 00:02 ETA (11/11): binutils-2. 52% [========== ] 2.3 MB/s | 6.0 MB 00:02 ETA (11/11): binutils-2. 59% [===========- ] 2.3 MB/s | 6.8 MB 00:01 ETA (11/11): binutils-2. 66% [============= ] 2.4 MB/s | 7.6 MB 00:01 ETA (11/11): binutils-2. 73% [==============- ] 2.4 MB/s | 8.5 MB 00:01 ETA (11/11): binutils-2. 81% [================ ] 2.4 MB/s | 9.3 MB 00:00 ETA (11/11): binutils-2. 88% [=================- ] 2.4 MB/s | 10 MB 00:00 ETA (11/11): binutils-2. 96% [=================== ] 2.5 MB/s | 11 MB 00:00 ETA (11/11): binutils-2.30-1.fc28.riscv64.rpm 1.7 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.9 MB/s | 11 MB 00:05 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [==== ] 1/1 Preparing : [========= ] 1/1 Preparing : [============= ] 1/1 Preparing : [================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [============================================= ] 1/1 Preparing : 1/1 Installing : binutils-2.30-1.fc28.ris [ ] 1/11 Installing : binutils-2.30-1.fc28.ris [= ] 1/11 Installing : binutils-2.30-1.fc28.ris [== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======== ] 1/11 Installing : binutils-2.30-1.fc28.ris [========= ] 1/11 Installing : binutils-2.30-1.fc28.ris [========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [============ ] 1/11 Installing : binutils-2.30-1.fc28.ris [============= ] 1/11 Installing : binutils-2.30-1.fc28.ris [============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [================ ] 1/11 Installing : binutils-2.30-1.fc28.ris [================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================== ] 1/11 Installing : binutils-2.30-1.fc28.riscv64 1/11 Running scriptlet: binutils-2.30-1.fc28.riscv64 1/11 Installing : elfutils-0.170-4.fc28.ri [ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================== ] 2/11 Installing : elfutils-0.170-4.fc28.riscv64 2/11 Installing : bzip2-1.0.6-24.fc28.risc [ ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.riscv64 3/11 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 4/11 Installing : patch-2.7.5-6.fc27.riscv [ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv64 5/11 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv64 6/11 Installing : diffutils-3.6-3.fc28.ris [ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================== ] 7/11 Installing : diffutils-3.6-3.fc28.riscv64 7/11 Running scriptlet: diffutils-3.6-3.fc28.riscv64 7/11 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv64 8/11 Running scriptlet: tar-2:1.29-7.fc27.riscv64 8/11 Installing : rpm-build-4.14.1-6.fc28. [ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [========= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 9/11 Installing : which-2.21-4.fc28.riscv6 [ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [===== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=========== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=============== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================= ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [======================== ] 10/11 Installing : which-2.21-4.fc28.riscv64 10/11 Running scriptlet: which-2.21-4.fc28.riscv64 10/11 Installing : make-1:4.2.1-6.fc27.risc [ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 11/11 Installing : make-1:4.2.1-6.fc27.riscv64 11/11 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 11/11 Verifying : tar-2:1.29-7.fc27.riscv64 1/11 Verifying : diffutils-3.6-3.fc28.riscv64 2/11 Verifying : make-1:4.2.1-6.fc27.riscv64 3/11 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 4/11 Verifying : zstd-1.3.3-1.fc27.riscv64 5/11 Verifying : which-2.21-4.fc28.riscv64 6/11 Verifying : patch-2.7.5-6.fc27.riscv64 7/11 Verifying : xz-5.2.3-5.fc28.riscv64 8/11 Verifying : bzip2-1.0.6-24.fc28.riscv64 9/11 Verifying : elfutils-0.170-4.fc28.riscv64 10/11 Verifying : binutils-2.30-1.fc28.riscv64 11/11 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 elfutils.riscv64 0.170-4.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:02:00 ago on Thu Feb 22 00:16:19 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 540 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 444 kB/s | 33 kB 00:05 ETA (2-4/4): kernel-head 36% [======= ] 597 kB/s | 929 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 834 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 51% [========== ] 654 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 90% [================== ] 813 kB/s | 2.3 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 984 kB/s | 1.0 MB 00:01 (4/4): kernel-header 96% [=================== ] 817 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 1.0 MB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 2.0 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off